Re: [Xansys] [STRUCT] Problems in processing a frame
You have rigid body motion happening somewhere. Apply a displacement and turn on Weak Springs. Look at your deformed shape - it should be obvious where the load is not being transferred.
-- Andrew
Andrew Kelly, P.E.
Principal Engineer
Honeywell | Sensing & IoT
2080 Arlingate Lane
Columbus, OH 43228
Office: 614.850.7818
Toll Free: 800.848.6564
Fax: 614.850.1111
andrew.kelly@honeywell.commailto:andrew.kelly@honeywell.com
measurementsensors.honeywell.com
Twitter: @honeywell
Agreeing with Mr. Kelly, you don’t have sufficient constraints, apparently.
Make sure to constrain the DOF in your model properly (or apply them based
on your problem specifications). You might want to have a look on the DOF
of your element type.
On Mon, Nov 19, 2018 at 7:03 PM Kelly, Andrew Andrew.Kelly@honeywell.com
wrote:
You have rigid body motion happening somewhere. Apply a displacement and
turn on Weak Springs. Look at your deformed shape - it should be obvious
where the load is not being transferred.
-- Andrew
Andrew Kelly, P.E.
Principal Engineer
Honeywell | Sensing & IoT
2080 Arlingate Lane
Columbus, OH 43228
Office: 614.850.7818
Toll Free: 800.848.6564
Fax: 614.850.1111
andrew.kelly@honeywell.commailto:andrew.kelly@honeywell.com
measurementsensors.honeywell.com
Twitter: @honeywell
Xansys-temp mailing list
Xansys-temp@xansystest.info
http://xansystest.info/mailman/listinfo/xansys-temp_xansystest.info
If you are receiving too many emails from XANSYS please consider changing
account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to
xansys-mod@tynecomp.co.uk and not to the list
--
---====
Mohammad A Gharaibeh, Ph.D.
Assistant Professor
Mechanical Engineering Department
The Hashemite University
P.O. Box 150459
Zarqa, 13115, Jordan
Tel: +962 - 5 - 390 3333 Ext. 4894
Fax: +962 - 5 - 382 6348
---====
Hi,
you can also do a modal analysis to see which parts are flying away, and then check the contacts again.
Best regards,
Mit freundlichen Grüßen,
M. Eng. Martin Mazurowski
Fa. Drehmoment GmbH
Hauptstrasse 9
D-86637 Wertingen
FON: 08272 9952-29
FAX: 08272 9952-99
Mail: martin.mazurowski@drehmoment.de
Web: www.drehmoment.de
Geschäftsführer: Dipl.-Ing.(FH) Josef Hofer und
Dipl.-Ing.(FH) Wolfgang Gärtner
Handelsregister Augsburg HRB 21452
Diese E-Mail kann vertrauliche und/oder rechtlich geschuetzte Informationen enthalten. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
Please consider your environmental responsibility before printing this e-mail.
-----Ursprüngliche Nachricht-----
Von: Kelly, Andrew [mailto:Andrew.Kelly@Honeywell.com]
Gesendet: Montag, 19. November 2018 18:03
An: xansys-temp@xansystest.info
Betreff: Re: [Xansys] [STRUCT] Problems in processing a frame
You have rigid body motion happening somewhere. Apply a displacement and turn on Weak Springs. Look at your deformed shape - it should be obvious where the load is not being transferred.
-- Andrew
Andrew Kelly, P.E.
Principal Engineer
Honeywell | Sensing & IoT
2080 Arlingate Lane
Columbus, OH 43228
Office: 614.850.7818
Toll Free: 800.848.6564
Fax: 614.850.1111
andrew.kelly@honeywell.commailto:andrew.kelly@honeywell.com
measurementsensors.honeywell.com
Twitter: @honeywell
Xansys-temp mailing list
Xansys-temp@xansystest.info
http://xansystest.info/mailman/listinfo/xansys-temp_xansystest.info
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list