Dear Ansys experts, could you please let me know how to read the design point values using APDL commands in Ansys workbench? For example: I have declared the parameters for force & displacement, and have assigned 3 different forces (as design points) to retrieve the displacements for a model. My requirement is to read these design point values using APDL commands in Ansys WB for further calculations. As a work around, I tried to write an input file which contains the design point values and read with the help of VREAD command. However, I would like to reduce the manual entry of the design points. So, please advise me if there is any better solution for this scenario.   Mit freundlichen Grüßen / Best Regards Shravani Bojja\ MECHANICAL ENGINEERING \[cid:[image001.png@01D99FA9.34DE65E0](mailto:image001.png@01D99FA9.34DE65E0)\] [http://www.saueressig.comhttp://www.saueressig.com/](http://www.saueressig.com/)\ Matthews International GmbH | Gutenbergstraße 1-3 | 48691 Vreden | Germany\ A SAUERESSIG Group brand CONFIDENTIALITY NOTICE: This message, together with any attachments, is intended only for the addressee. It may contain information which is proprietary, confidential, legally privileged and/or exempt from disclosure. If you are not the intended recipient of this message, you are hereby notified that any disclosure, copying, distribution, use, or any action or reliance on this communication is strictly prohibited. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete the message, along with any attachments.