Dear ANSYS users, I have a group of Design Points I would like to update remotely (Running ANSYS WB 16.1). I have tried several settings: a) RSM set by choosing a Solve Process Settings running remotely at Solution schematic options. First design point is updated properly (according to solve process settings). While job is running remotely, next design point is loaded and geometry, model and setup blocks are updated. If DP2 reaches Solution update and DP1 is still running, an Error message appears saying "Update failed for the Solution component in Static Structural for design point 2. Queue %queue name% does not exist on solve manager. Edit your Mechanical Solve Process Settings and select a valid queue". It skips then DP2 and starts updating DP3. When DP3 reaches Solution update, as DP1 had already finished it was sent to RSM with no problems. b) RSM chosen by setting Update Option= Submit to Remote Solve Manager at Parameter Set schematics. DP1 to DP3 jobs run one after the other but only with 1 process!!! (as specified by a temporary bat file that is created automatically)... How could I specify the solve process settings I would like to be used (license type, number of processors, distributed, etc etc)? Thank you for your help! Regards, Carles SAGUÉS MITJANA Simulation Engineer BU Sheet Fed R&D Support Bobst Mex SA -----Message d'origine----- De : Xansys [mailto:xansys-bounces@xansys.org] De la part de Simon Pereira Envoyé : jeudi 4 juin 2015 18:31 À : ANSYS User Discussion List Objet : Re: [Xansys] [WB] Update Option Quick Reference Guide Right, that is how it is designed to work (RSM set either at the project level or the solve process settings), but other combinations are/were possible. I recall that there were some strange things that happened with certain combinations and development actually put in code to prevent them from being possible. However, if you do try out some of these combinations and you do get them to work (or work badly), I am interested to hear about it. Best regards, Simon Pereira Product Manager Platform Development Business Unit; ANSYS Inc. Tel: 1.734.213.1217 www.ansys.com On Wed, Jun 3, 2015 at 11:03 AM, Andrew Kokemoor <AndrewK@hydraforce.com> wrote: > I think you could run it like that with either a) Project Update set > to remote with Pre-RSM Foreground Update or b) Project Update set to > foreground and Solve Process Settings set to remote. > > Andrew Kokemoor > HydraForce Inc > > -----Original Message----- > From: Xansys [mailto:xansys-bounces@xansys.org] On Behalf Of > andrew.kelly > Sent: Tuesday, June 02, 2015 8:45 PM > To: xansys@xansys.org > Subject: Re: [Xansys] [WB] Update Option Quick Reference Guide > > Here's an example of "clever", though I'm not quite sure the exact > settings I used. > > I had a large DOE to do (49 design points). Geometry updates through > DM and Creo are slower than molasses (10+ minute round trip for each > point - heavy on disk activity and light on CPU activity). > > Somehow I had finagled WB into solving Mechanical models remotely > while it was still setting up the new DP. By the time it had finished > setting up DP #49, about 12 DP had finished on the remote computer and > DOE results had been retrieved and updated. > > By generating new DP locally in parallel with remote solving them, the > DOE finished at least an hour faster. > > ------------------------ > Andrew C. Kelly, P.E. > Honeywell Sensing &amp; Control > andrew.kelly@honeywell.com > > > > > -------------------- m2f -------------------- > > Sent using Mail2Forum (http://www.mail2forum.com). > > Read this topic online here: > http://xansys.org/forum/viewtopic.php?p=98131#98131 > > -------------------- m2f -------------------- > > > +-------------------------------------------------------------+ > | XANSYS web - www.xansys.org/forum | > | The Online Community for users of ANSYS, Inc. Software | > | Hosted by PADT - www.padtinc.com | > | Send administrative requests to xansys-mod@tynecomp.co.uk | > +-------------------------------------------------------------+ > +-------------------------------------------------------------+ > | XANSYS web - www.xansys.org/forum | > | The Online Community for users of ANSYS, Inc. Software | > | Hosted by PADT - www.padtinc.com | > | Send administrative requests to xansys-mod@tynecomp.co.uk | > +-------------------------------------------------------------+ > +-------------------------------------------------------------+ | XANSYS web - www.xansys.org/forum | | The Online Community for users of ANSYS, Inc. Software | | Hosted by PADT - www.padtinc.com | | Send administrative requests to xansys-mod@tynecomp.co.uk | +-------------------------------------------------------------+ BOBST celebrates its 125th anniversary: 125 YEARS <http://www.bobst.com/125years> I FOR THE NEXT GENERATION<http://www.bobst.com/125years> This message and any attachments (the message) are intended solely for the addressees and are confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accordance with its purpose, any dissemination, copying or disclosure, either whole or partial is prohibited without prior formal approval. The internet cannot guarantee the integrity of the message. The companies of Bobst Group do not accept any liability for data corruption, delay, interception or any modification in relation with this message.