Folks, I remember a few years ago that the Mechanical GUI had an issue. Normally, when setting a custom pinball radius for a contact pair, a translucent sphere appears on the model at the contact location to illustrate the pinball's size. There was a version where this feature was broken and then fixed in the subsequent release. Does anyone remember which version that it was broken in? All I can remember is that it was in a release that had the new GUI, not the old GUI (i.e., the issue was in v2019R2 or later). Matt Ridzon, PE, MSME Sr. Engineering Analyst Email matt@prime-engineer.com<mailto:matt@prime-engineer.com> Mail 266 Main St, Burlington, VT 05401 Web www.prime-engineer.com<http://www.prime-engineer.com/> [A blue hexagon with white letters Description automatically generated] PRIME ENGINEERING LLC This message (including any attachments) may contain confidential, proprietary, privileged and/or private information. The information is intended to be for the use of the individual or entity designated above. If you are not the intended recipient of this message, please notify the sender immediately, and delete the message and any attachments. Any disclosure, reproduction, distribution or other use of this message or any attachments by an individual or entity other than the intended recipient is prohibited.