Incorporate spring stiffness
Thanks Anjum,
This is different issue, I cant see imported elements, may be I am missing something in process.
Regards
Bhavesh
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
-----Original Message-----
From: Factoo, Anjum anjum.factoo@capgemini.com
Sent: Monday, 9 January 2023 12:52 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: RE: Importing Element File
CAUTION : External email. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello,
See ETCHG command in ur APDL help, ANSYS with automatically change the element type based on the analysis you are performing.
Thanks
Anjum
-----Original Message-----
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: 09 January 2023 13:54
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Importing Element File
This mail has been sent by an external source
Hello All,
Looking any suggestion in element import in APDL. Here is the details of it.
I am running two analysis, one with Structural and other with thermal. I am modifying elements in Structural model (Some geometry) (SOLID185) and then importing it to the Thermal model (SOLID70), somehow, I can see nodes are created however, I could not see element created.
Please do let me if its not clear.
Thanks and Regards
Bhavesh V.
R & D Engineer
EGA, UAE
PS. I am changing ET type to SOLID 70 (On elements which require to import in thermal analysis) before Ewrite command in Structural analysis.
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Hi
Have you tried it once through GUI mode before automating the process? I used a similar procedure earlier and for me, the ETCHG command worked fine. And if still you are facing issues, you may write the structural results file before diving into thermal analysis. Thereafter, you may import a fresh file with structural elements and enforce ETCHG into it.
Best Wishes--
Rajdeep
---===================
Rajdeep Ghosh, Senior Project Scientist[cid:f2178518-481f-443d-97fd-ac7cd1a443b5]
Research Area: Musculoskeletal Biomechanics,
Tissue Mechanobiology,
Stem-Cell tissue engineering,
Soft Computing
Orthopaedic Biomechanics and Implant Design (OBID) Group
Indian Institute of Technology Delhi
Hauz Khas, New Delhi, Delhi, India-110 016
---===============
"You have to grow from the inside out. None can teach you, none can make you spiritual. There is no other teacher but your own soul." - Swami Vivekananda
---===================
Institute website: https://iitg.ac.in/mech/students/rajdeepmech/
Personal website:https://sites.google.com/view/rajdeepghosh/home?authuser=0
ResearchGate Profile:https://www.researchgate.net/profile/Rajdeep-Ghosh-5
LinkedIn Profile:https://www.linkedin.com/in/rajdeep-iitg/
Twitter Handle:@rajdeepghosh27https://twitter.com/rajdeepghosh27
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: 09 January 2023 13:54
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Importing Element File
Hello All,
Looking any suggestion in element import in APDL. Here is the details of it.
I am running two analysis, one with Structural and other with thermal. I am modifying elements in Structural model (Some geometry) (SOLID185) and then importing it to the Thermal model (SOLID70), somehow, I can see nodes are created however, I could not see element created.
Please do let me if its not clear.
Thanks and Regards
Bhavesh V.
R & D Engineer
EGA, UAE
PS. I am changing ET type to SOLID 70 (On elements which require to import in thermal analysis) before Ewrite command in Structural analysis.
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.org
To unsubscribe send an email to xansys-temp-leave@list.xansys.org
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
Dear Sir,
you might try the following in the structural model
/prep7
et,11011,185
cmse,,newele ! newele is a component containing the modified elements
cmse,,newnod ! newnod is a component containing the modified nodes
emod,all,type,11011
nwri....
ewri....
Then you might try the following in the thermal model
/prep7
et,11011,70
Nsel,none
Esel,none
nrea...
erea...
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.commailto:riccardo.testi@piaggio.com
-----Original Message-----
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: lunedì 9 gennaio 2023 09:24
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Importing Element File
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello All,
Looking any suggestion in element import in APDL. Here is the details of it.
I am running two analysis, one with Structural and other with thermal. I am modifying elements in Structural model (Some geometry) (SOLID185) and then importing it to the Thermal model (SOLID70), somehow, I can see nodes are created however, I could not see element created.
Please do let me if its not clear.
Thanks and Regards
Bhavesh V.
R & D Engineer
EGA, UAE
PS. I am changing ET type to SOLID 70 (On elements which require to import in thermal analysis) before Ewrite command in Structural analysis.
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.ega.ae&e=e5c82b6b&h=152c0129&f=y&p=y
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.orgmailto:xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.orgmailto:xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.ukmailto:xansys-mod@tynecomp.co.uk and not to the list
Thank you Riccardo, it worked !
Well, addition to it, it was showing Shape error while importing to thermal model, which was not showing in structural. I applied, SHPP, OFF.; and it worked.
I need to see on merge and results carefully.
Thank you !
Regards
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
-----Original Message-----
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Monday, 9 January 2023 2:53 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: Importing Element File
CAUTION : External email. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Dear Sir,
you might try the following in the structural model
/prep7
et,11011,185
cmse,,newele ! newele is a component containing the modified elements
cmse,,newnod ! newnod is a component containing the modified nodes
emod,all,type,11011
nwri....
ewri....
Then you might try the following in the thermal model
/prep7
et,11011,70
Nsel,none
Esel,none
nrea...
erea...
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.commailto:riccardo.testi@piaggio.com
-----Original Message-----
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: lunedì 9 gennaio 2023 09:24
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Importing Element File
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello All,
Looking any suggestion in element import in APDL. Here is the details of it.
I am running two analysis, one with Structural and other with thermal. I am modifying elements in Structural model (Some geometry) (SOLID185) and then importing it to the Thermal model (SOLID70), somehow, I can see nodes are created however, I could not see element created.
Please do let me if its not clear.
Thanks and Regards
Bhavesh V.
R & D Engineer
EGA, UAE
PS. I am changing ET type to SOLID 70 (On elements which require to import in thermal analysis) before Ewrite command in Structural analysis.
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.ega.ae&e=e5c82b6b&h=152c0129&f=y&p=y
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.orgmailto:xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.orgmailto:xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.ukmailto:xansys-mod@tynecomp.co.uk and not to the list
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Dear Sir,
to avoid overwriting problems due to element and node numbering, you might look into the CDWR/CDRE combo, which automatically renumber the elements and nodes.
As for the shape checks, I think the criteria change based on the element class.
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
-----Original Message-----
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: lunedì 9 gennaio 2023 13:12
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Re: Importing Element File
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Thank you Riccardo, it worked !
Well, addition to it, it was showing Shape error while importing to thermal model, which was not showing in structural. I applied, SHPP, OFF.; and it worked.
I need to see on merge and results carefully.
Thank you !
Regards
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.ega.ae&e=e5c82b6b&h=152c0129&f=y&p=y
-----Original Message-----
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Monday, 9 January 2023 2:53 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: Importing Element File
CAUTION : External email. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Dear Sir,
you might try the following in the structural model
/prep7
et,11011,185
cmse,,newele ! newele is a component containing the modified elements
cmse,,newnod ! newnod is a component containing the modified nodes
emod,all,type,11011
nwri....
ewri....
Then you might try the following in the thermal model
/prep7
et,11011,70
Nsel,none
Esel,none
nrea...
erea...
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.commailto:riccardo.testi@piaggio.com
-----Original Message-----
From: Bhaveshkumar Rameshchandra Varia via Xansys xansys-temp@list.xansys.org
Sent: lunedì 9 gennaio 2023 09:24
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Cc: Bhaveshkumar Rameshchandra Varia bhavaria@ega.ae
Subject: [Xansys] Importing Element File
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello All,
Looking any suggestion in element import in APDL. Here is the details of it.
I am running two analysis, one with Structural and other with thermal. I am modifying elements in Structural model (Some geometry) (SOLID185) and then importing it to the Thermal model (SOLID70), somehow, I can see nodes are created however, I could not see element created.
Please do let me if its not clear.
Thanks and Regards
Bhavesh V.
R & D Engineer
EGA, UAE
PS. I am changing ET type to SOLID 70 (On elements which require to import in thermal analysis) before Ewrite command in Structural analysis.
Bhaveshkumar Rameshchandra Varia
Engineer I - R&D
Technology Development & Transfer
Midstream
T +971 2 509 444
<BR>D +97148221034
<BR>M +971543924196
Emirates Global Aluminium
PO Box 109111, Abu Dhabi
United Arab Emirates
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.ega.ae&e=e5c82b6b&h=152c0129&f=y&p=y
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.orgmailto:xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.orgmailto:xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.ukmailto:xansys-mod@tynecomp.co.uk and not to the list
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
This is an e-mail from Emirates Global Aluminium PJSC. Its contents are confidential to the intended recipient. If you are not the intended recipient be advised that you have received this email in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. It may not be disclosed to or used by anyone other than its intended recipient, nor may it be copied in any way. If received in error please e-mail a reply to the sender and delete it from your system. Although this e-mail has been scanned for viruses, Emirates Global Aluminium cannot ultimately accept any responsibility for viruses and it is your responsibility to scan attachments (if any).
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list