Empathy List Archives

xansys-temp@list.xansys.org

XANSYS Mailing List Home

View all threads

Re: [Xansys] workbrnch v15.0 modal cyclic symmetry

Eppinga, Johan (Jay)

Wed, Feb 24, 2016 4:12 PM

Same 'ol, same 'ol. The Brave New World still hasn't caught up with Mr. Swanson.

Johan Eppinga
FEA Engineer
Hartzell Propeller Inc
Piqua OH

-----Original Message-----
From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Bohlen, Dan (GE Aviation, US)
Sent: Wednesday, February 24, 2016 10:53 AM
To: XANSYS Mailing List Temporary Home
Subject: Re: [Xansys] workbrnch v15.0 modal cyclic symmetry

C'mon dump it out into RM/WA (Real Man/Woman Ansys) and solve! :-)

Dan notbeingpoliticiallyincorrectthistime Bohlen Senior/ SSt Engineer, Military HPT Analysis STAR review chairman, Fan and Booster GE Aircraft Engines
1 Neumann Way
Evendale, OH 45215
Build 90 Col K1.5 cube 1N152
M/D H110 1-513-243-2366

-----Original Message-----
From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Gallagher, Keith (GE Aviation, US)
Sent: Wednesday, February 24, 2016 10:26 AM
To: XANSYS Mailing List Temporary Home
Subject: [Xansys] workbrnch v15.0 modal cyclic symmetry

I'm doing more and more in workbench these days. So here goes a hopefully intelligent question.

WB at this version (stuck here for now) will not impose modal cyclic symmetery on part of a model that has joints within the model.
We coded the cyclic symmetry in APDL in command snippets, and it works, but now we cannot seem to post process correctly.

First workbench automatically expands the solution but will not plot deformed shape (menu is greyed out to undeformed) Second, we can only access the first set of modes (harmonic= 0). Modes with a harmonic index of 1 show up in the frequencies but cannot be selected for plotting results.

Any ideas for workarounds? Or is this fixed in a higher version?

Thanks,
Keith Gallagher
GE Aviation

Xansys-temp mailing list
Xansys-temp@xansystest.info
https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwICAg&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=ODbSC1x8G-kjwUv8VmExH0Uk1JMH8CJGL7YeBBlQXvM&m=KndrMqZHwQzt0CnhbqXtjPlHc81mfALEXSi3sim7ToU&s=i55fxN1K3QJy5AdCX5UhtVPrr1Iyoo_Uc-U0hYB4Wr8&e=
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.

Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

Xansys-temp mailing list
Xansys-temp@xansystest.info
http://xansystest.info/mailman/listinfo/xansys-temp_xansystest.info
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.

Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

Same 'ol, same 'ol. The Brave New World still hasn't caught up with Mr. Swanson. Johan Eppinga FEA Engineer Hartzell Propeller Inc Piqua OH -----Original Message----- From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Bohlen, Dan (GE Aviation, US) Sent: Wednesday, February 24, 2016 10:53 AM To: XANSYS Mailing List Temporary Home Subject: Re: [Xansys] workbrnch v15.0 modal cyclic symmetry C'mon dump it out into RM/WA (Real Man/Woman Ansys) and solve! :-) Dan notbeingpoliticiallyincorrectthistime Bohlen Senior/ SSt Engineer, Military HPT Analysis STAR review chairman, Fan and Booster GE Aircraft Engines 1 Neumann Way Evendale, OH 45215 Build 90 Col K1.5 cube 1N152 M/D H110 1-513-243-2366 -----Original Message----- From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Gallagher, Keith (GE Aviation, US) Sent: Wednesday, February 24, 2016 10:26 AM To: XANSYS Mailing List Temporary Home Subject: [Xansys] workbrnch v15.0 modal cyclic symmetry I'm doing more and more in workbench these days. So here goes a hopefully intelligent question. WB at this version (stuck here for now) will not impose modal cyclic symmetery on part of a model that has joints within the model. We coded the cyclic symmetry in APDL in command snippets, and it works, but now we cannot seem to post process correctly. First workbench automatically expands the solution but will not plot deformed shape (menu is greyed out to undeformed) Second, we can only access the first set of modes (harmonic= 0). Modes with a harmonic index of 1 show up in the frequencies but cannot be selected for plotting results. Any ideas for workarounds? Or is this fixed in a higher version? Thanks, Keith Gallagher GE Aviation _______________________________________________ Xansys-temp mailing list Xansys-temp@xansystest.info https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwICAg&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=ODbSC1x8G-kjwUv8VmExH0Uk1JMH8CJGL7YeBBlQXvM&m=KndrMqZHwQzt0CnhbqXtjPlHc81mfALEXSi3sim7ToU&s=i55fxN1K3QJy5AdCX5UhtVPrr1Iyoo_Uc-U0hYB4Wr8&e= If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day. Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________ Xansys-temp mailing list Xansys-temp@xansystest.info http://xansystest.info/mailman/listinfo/xansys-temp_xansystest.info If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day. Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

Gallagher, Keith (GE Aviation, US)

Wed, Feb 24, 2016 4:19 PM

MUCH agreed

Keith Gallagher
GE Aviation

-----Original Message-----
From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Eppinga, Johan (Jay)
Sent: Wednesday, February 24, 2016 11:12 AM
To: XANSYS Mailing List Temporary Home
Subject: Re: [Xansys] workbrnch v15.0 modal cyclic symmetry

Same 'ol, same 'ol. The Brave New World still hasn't caught up with Mr. Swanson.

Johan Eppinga
FEA Engineer
Hartzell Propeller Inc
Piqua OH

C'mon dump it out into RM/WA (Real Man/Woman Ansys) and solve! :-)

I'm doing more and more in workbench these days. So here goes a hopefully intelligent question.

Any ideas for workarounds? Or is this fixed in a higher version?

Thanks,
Keith Gallagher
GE Aviation

Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

Xansys-temp mailing list
Xansys-temp@xansystest.info
https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwIFAw&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=_fbB-aRI9dwkgT6yiQZc7ghrjIBlnUDV-1HGQbHE9bs&m=s8oU-gJJ5bgBvLAMrZHcObt7V9Tz535XaXXWLYx3k0E&s=54dH5_cuTRCWe9x258tK276_r2m707yOWdUnU1T-4DY&e=
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.

Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

Xansys-temp mailing list
Xansys-temp@xansystest.info
https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwIFAw&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=_fbB-aRI9dwkgT6yiQZc7ghrjIBlnUDV-1HGQbHE9bs&m=s8oU-gJJ5bgBvLAMrZHcObt7V9Tz535XaXXWLYx3k0E&s=54dH5_cuTRCWe9x258tK276_r2m707yOWdUnU1T-4DY&e=
If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.

Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list

MUCH agreed Keith Gallagher GE Aviation -----Original Message----- From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Eppinga, Johan (Jay) Sent: Wednesday, February 24, 2016 11:12 AM To: XANSYS Mailing List Temporary Home Subject: Re: [Xansys] workbrnch v15.0 modal cyclic symmetry Same 'ol, same 'ol. The Brave New World still hasn't caught up with Mr. Swanson. Johan Eppinga FEA Engineer Hartzell Propeller Inc Piqua OH -----Original Message----- From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Bohlen, Dan (GE Aviation, US) Sent: Wednesday, February 24, 2016 10:53 AM To: XANSYS Mailing List Temporary Home Subject: Re: [Xansys] workbrnch v15.0 modal cyclic symmetry C'mon dump it out into RM/WA (Real Man/Woman Ansys) and solve! :-) Dan notbeingpoliticiallyincorrectthistime Bohlen Senior/ SSt Engineer, Military HPT Analysis STAR review chairman, Fan and Booster GE Aircraft Engines 1 Neumann Way Evendale, OH 45215 Build 90 Col K1.5 cube 1N152 M/D H110 1-513-243-2366 -----Original Message----- From: Xansys-temp [mailto:xansys-temp-bounces@xansystest.info] On Behalf Of Gallagher, Keith (GE Aviation, US) Sent: Wednesday, February 24, 2016 10:26 AM To: XANSYS Mailing List Temporary Home Subject: [Xansys] workbrnch v15.0 modal cyclic symmetry I'm doing more and more in workbench these days. So here goes a hopefully intelligent question. WB at this version (stuck here for now) will not impose modal cyclic symmetery on part of a model that has joints within the model. We coded the cyclic symmetry in APDL in command snippets, and it works, but now we cannot seem to post process correctly. First workbench automatically expands the solution but will not plot deformed shape (menu is greyed out to undeformed) Second, we can only access the first set of modes (harmonic= 0). Modes with a harmonic index of 1 show up in the frequencies but cannot be selected for plotting results. Any ideas for workarounds? Or is this fixed in a higher version? Thanks, Keith Gallagher GE Aviation _______________________________________________ Xansys-temp mailing list Xansys-temp@xansystest.info https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwICAg&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=ODbSC1x8G-kjwUv8VmExH0Uk1JMH8CJGL7YeBBlQXvM&m=KndrMqZHwQzt0CnhbqXtjPlHc81mfALEXSi3sim7ToU&s=i55fxN1K3QJy5AdCX5UhtVPrr1Iyoo_Uc-U0hYB4Wr8&e= If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day. Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________ Xansys-temp mailing list Xansys-temp@xansystest.info https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwIFAw&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=_fbB-aRI9dwkgT6yiQZc7ghrjIBlnUDV-1HGQbHE9bs&m=s8oU-gJJ5bgBvLAMrZHcObt7V9Tz535XaXXWLYx3k0E&s=54dH5_cuTRCWe9x258tK276_r2m707yOWdUnU1T-4DY&e= If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day. Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________ Xansys-temp mailing list Xansys-temp@xansystest.info https://urldefense.proofpoint.com/v2/url?u=http-3A__xansystest.info_mailman_listinfo_xansys-2Dtemp-5Fxansystest.info&d=CwIFAw&c=IV_clAzoPDE253xZdHuilRgztyh_RiV3wUrLrDQYWSI&r=_fbB-aRI9dwkgT6yiQZc7ghrjIBlnUDV-1HGQbHE9bs&m=s8oU-gJJ5bgBvLAMrZHcObt7V9Tz535XaXXWLYx3k0E&s=54dH5_cuTRCWe9x258tK276_r2m707yOWdUnU1T-4DY&e= If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day. Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list