Re: [External] - old ansys command--I can't remember!
Eric,
I for one would most certainly welcome an update! I have always found the PADT articles a worthwhile read. If I could, I would download every single one and keep it on my hard drive for a rainy day. Maybe even store it in the cloud!
Tom Caltabellotta
Senior Mechanical Engineer
CACI inc
t.caltabellotta@caci.com
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Wednesday, January 18, 2023 11:12 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Robert,
Please share how it goes. I want to write a new article on this. It's been 17 years, may be time for an update.
Eric
————————————————
Eric Miller
Principal & Co-Owner
PADT, Inc
eric.miller@padtinc.com
480.813.4884 o
602.722.4622 m
Sent from my iPhone
————————————————
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 9:01:50 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
So am I.....
But I still remember when someone from Ansys scolded me at a conference since I was using Classic only via command line, because I could have scared the bystanders, who might have been thinking it was a hacker-style SW....
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: mercoledì 18 gennaio 2023 16:53
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Riccardo, you have no idea how much that pleases me. I'm using Workbench more and more these days, but I'll never give up my Classic!
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 2:48 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Dear Mr. Dillworth,
since you value objects with black background, I attach a Piaggio crankcase for a modal evaluation, dating back to the end of 20th century.
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: martedì 17 gennaio 2023 18:29
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Man, I love this group. Thanks, Eric and Joe (and all fellow old-timers--go Classic!).
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Tuesday, January 17, 2023 12:24 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Joe beat me to it!
Rod Scholl wrote anarticle for our old newsletter in May 31, 2005 about jobname.solc.
Eric
We Make Innovation Work
Eric Miller
Products and Services for
Principal & Co-Owner
Simulation, Product Development, and Additive Manufacturing eric.miller@padtinc.com Arizona | California | Colorado | New Mexico | Texas | Utah O 480.813.4884 https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.padtinc.com&e=e5c82b6b&h=d502cdef&f=y&p=y M 602.722.4622
CONFIDENTIALITY NOTICE: This e-mail message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. Unless you are the intended recipient, you are hereby notified that copying, forwarding, printing, or otherwise disseminating the information contained in or attached to this e-mail is strictly prohibited. If you are not the intended recipient, please notify the sender by telephone and immediately and permanently delete and destroy all copies and printouts of this e-mail message and/or attachments.
-----Original Message-----
From: Joe Metrisin Joe.Metrisin@kratosdefense.com
Sent: Tuesday, January 17, 2023 10:15 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Create a file in the running directory: jobname.solc with the commands in it.
Joseph T Metrisin
Structures Lead
Florida Turbine Technologies, Inc
1701 Military Tr. Suite 110 | Jupiter, FL 33458 USA
+1 (561) 427-6346 Office | +1 (772) 834-4156 Mobile
Joe.Metrisin@kratosdefense.com
Visit our website: https://urlsand.esvalabs.com/?u=https%3A%2F%2Fkratosdefense.com&e=e5c82b6b&h=0481c708&f=y&p=y
Confidentiality Note:
The information contained in this transmission and any attachments are proprietary and may be privileged, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you received this communication in error, please delete the message and immediately notify the sender via the contact information listed above.
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: Tuesday, January 17, 2023 12:10 PM
To: xansys-temp@list.xansys.org
Subject: [External] - [Xansys] old ansys command--I can't remember!
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
This is an ANSYS Classic question.
I vaguely remember there being some command that would enable a user to submit a command to a running ANSYS job midstream. I'm not talking about stopping and restarting, but altering a running job somehow, midstream. . Does this ring a bell with anyone?
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
Will do Eric. I'll inquire of my colleague today.
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
www.socotec.us
Consider the environment before printing this email
This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: cameljoe@optonline.net cameljoe@optonline.net
Sent: Wednesday, January 18, 2023 11:30 AM
To: 'XANSYS Mailing List Home' xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Eric,
I for one would most certainly welcome an update! I have always found the PADT articles a worthwhile read. If I could, I would download every single one and keep it on my hard drive for a rainy day. Maybe even store it in the cloud!
Tom Caltabellotta
Senior Mechanical Engineer
CACI inc
t.caltabellotta@caci.com
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Wednesday, January 18, 2023 11:12 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Robert,
Please share how it goes. I want to write a new article on this. It's been 17 years, may be time for an update.
Eric
————————————————
Eric Miller
Principal & Co-Owner
PADT, Inc
eric.miller@padtinc.com
480.813.4884 o
602.722.4622 m
Sent from my iPhone
————————————————
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 9:01:50 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
So am I.....
But I still remember when someone from Ansys scolded me at a conference since I was using Classic only via command line, because I could have scared the bystanders, who might have been thinking it was a hacker-style SW....
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: mercoledì 18 gennaio 2023 16:53
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Riccardo, you have no idea how much that pleases me. I'm using Workbench more and more these days, but I'll never give up my Classic!
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 2:48 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Dear Mr. Dillworth,
since you value objects with black background, I attach a Piaggio crankcase for a modal evaluation, dating back to the end of 20th century.
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: martedì 17 gennaio 2023 18:29
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Man, I love this group. Thanks, Eric and Joe (and all fellow old-timers--go Classic!).
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Tuesday, January 17, 2023 12:24 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Joe beat me to it!
Rod Scholl wrote anarticle for our old newsletter in May 31, 2005 about jobname.solc.
Eric
We Make Innovation Work
Eric Miller
Products and Services for
Principal & Co-Owner
Simulation, Product Development, and Additive Manufacturing eric.miller@padtinc.com Arizona | California | Colorado | New Mexico | Texas | Utah O 480.813.4884 https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.padtinc.com&e=e5c82b6b&h=d502cdef&f=y&p=y M 602.722.4622
CONFIDENTIALITY NOTICE: This e-mail message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. Unless you are the intended recipient, you are hereby notified that copying, forwarding, printing, or otherwise disseminating the information contained in or attached to this e-mail is strictly prohibited. If you are not the intended recipient, please notify the sender by telephone and immediately and permanently delete and destroy all copies and printouts of this e-mail message and/or attachments.
-----Original Message-----
From: Joe Metrisin Joe.Metrisin@kratosdefense.com
Sent: Tuesday, January 17, 2023 10:15 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Create a file in the running directory: jobname.solc with the commands in it.
Joseph T Metrisin
Structures Lead
Florida Turbine Technologies, Inc
1701 Military Tr. Suite 110 | Jupiter, FL 33458 USA
+1 (561) 427-6346 Office | +1 (772) 834-4156 Mobile
Joe.Metrisin@kratosdefense.com
Visit our website: https://urlsand.esvalabs.com/?u=https%3A%2F%2Fkratosdefense.com&e=e5c82b6b&h=0481c708&f=y&p=y
Confidentiality Note:
The information contained in this transmission and any attachments are proprietary and may be privileged, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you received this communication in error, please delete the message and immediately notify the sender via the contact information listed above.
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: Tuesday, January 17, 2023 12:10 PM
To: xansys-temp@list.xansys.org
Subject: [External] - [Xansys] old ansys command--I can't remember!
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
This is an ANSYS Classic question.
I vaguely remember there being some command that would enable a user to submit a command to a running ANSYS job midstream. I'm not talking about stopping and restarting, but altering a running job somehow, midstream. . Does this ring a bell with anyone?
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Last time is used the jobname.solc, it could have some strange results. Usually command specific. Some commands work well while others do not.
I seem to recall issues with changing the force convergence, for example.
I am not on the board much these days, but glad to see this is still being used. More importantly it seems everyone still has their sense of humor : -)
Keith Gallagher
GE Aerospace
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: Wednesday, January 18, 2023 11:35 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: EXT: [Xansys] Re: [External] - old ansys command--I can't remember!
WARNING: This email originated from outside of GE. Please validate the sender's email address before clicking on links or attachments as they may not be safe.
Will do Eric. I'll inquire of my colleague today.
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
www.socotec.us
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: cameljoe@optonline.net cameljoe@optonline.net
Sent: Wednesday, January 18, 2023 11:30 AM
To: 'XANSYS Mailing List Home' xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Eric,
I for one would most certainly welcome an update! I have always found the PADT articles a worthwhile read. If I could, I would download every single one and keep it on my hard drive for a rainy day. Maybe even store it in the cloud!
Tom Caltabellotta
Senior Mechanical Engineer
CACI inc
t.caltabellotta@caci.com
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Wednesday, January 18, 2023 11:12 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Robert,
Please share how it goes. I want to write a new article on this. It's been 17 years, may be time for an update.
Eric
————————————————
Eric Miller
Principal & Co-Owner
PADT, Inc
eric.miller@padtinc.com
480.813.4884 o
602.722.4622 m
Sent from my iPhone
————————————————
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 9:01:50 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
So am I.....
But I still remember when someone from Ansys scolded me at a conference since I was using Classic only via command line, because I could have scared the bystanders, who might have been thinking it was a hacker-style SW....
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: mercoledì 18 gennaio 2023 16:53
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Riccardo, you have no idea how much that pleases me. I'm using Workbench more and more these days, but I'll never give up my Classic!
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Testi Riccardo riccardo.testi@piaggio.com
Sent: Wednesday, January 18, 2023 2:48 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Dear Mr. Dillworth,
since you value objects with black background, I attach a Piaggio crankcase for a modal evaluation, dating back to the end of 20th century.
Best regards
Riccardo Testi
Development and Strategies
2 Wheeler Engines Technical Centre
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
Phone: +39 0587 272850
Fax: +39 0587 272010
Mobile: +39 339 7241918
E-mail: riccardo.testi@piaggio.com
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: martedì 17 gennaio 2023 18:29
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
CAUTION:This email originated from outside the Piaggio Group. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Man, I love this group. Thanks, Eric and Joe (and all fellow old-timers--go Classic!).
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
-----Original Message-----
From: Eric Miller eric.miller@padtinc.com
Sent: Tuesday, January 17, 2023 12:24 PM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Joe beat me to it!
Rod Scholl wrote anarticle for our old newsletter in May 31, 2005 about jobname.solc.
Eric
We Make Innovation Work
Eric Miller
Products and Services for
Principal & Co-Owner
Simulation, Product Development, and Additive Manufacturing eric.miller@padtinc.com Arizona | California | Colorado | New Mexico | Texas | Utah O 480.813.4884 https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.padtinc.com&e=e5c82b6b&h=d502cdef&f=y&p=y M 602.722.4622
CONFIDENTIALITY NOTICE: This e-mail message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. Unless you are the intended recipient, you are hereby notified that copying, forwarding, printing, or otherwise disseminating the information contained in or attached to this e-mail is strictly prohibited. If you are not the intended recipient, please notify the sender by telephone and immediately and permanently delete and destroy all copies and printouts of this e-mail message and/or attachments.
-----Original Message-----
From: Joe Metrisin Joe.Metrisin@kratosdefense.com
Sent: Tuesday, January 17, 2023 10:15 AM
To: XANSYS Mailing List Home xansys-temp@list.xansys.org
Subject: [Xansys] Re: [External] - old ansys command--I can't remember!
Create a file in the running directory: jobname.solc with the commands in it.
Joseph T Metrisin
Structures Lead
Florida Turbine Technologies, Inc
1701 Military Tr. Suite 110 | Jupiter, FL 33458 USA
+1 (561) 427-6346 Office | +1 (772) 834-4156 Mobile
Joe.Metrisin@kratosdefense.com
Visit our website: https://urlsand.esvalabs.com/?u=https%3A%2F%2Fkratosdefense.com&e=e5c82b6b&h=0481c708&f=y&p=y
Confidentiality Note:
The information contained in this transmission and any attachments are proprietary and may be privileged, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you received this communication in error, please delete the message and immediately notify the sender via the contact information listed above.
-----Original Message-----
From: Robert Dillworth Robert.Dillworth@socotec.us
Sent: Tuesday, January 17, 2023 12:10 PM
To: xansys-temp@list.xansys.org
Subject: [External] - [Xansys] old ansys command--I can't remember!
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
This is an ANSYS Classic question.
I vaguely remember there being some command that would enable a user to submit a command to a running ANSYS job midstream. I'm not talking about stopping and restarting, but altering a running job somehow, midstream. . Does this ring a bell with anyone?
Robert Dillworth, PE
Principal Engineer
T.: +1 212 233 2737 x966
Robert.Dillworth@socotec.us
SOCOTEC Engineering, Inc
151 W 42nd Street, 24th Floor
New York
, NY 10036
https://urlsand.esvalabs.com/?u=http%3A%2F%2Fwww.socotec.us&e=e5c82b6b&h=b4454066&f=y&p=y
Consider the environment before printing this email This e-mail may contain confidential, copyright or privileged information. If you are not the intended recipient or if you have received this e-mail in error, please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
SOCOTEC cannot guarantee the integrity of this communication. As the Internet is not a guaranteed secure environment, SOCOTEC cannot ensure that an e-mail is not interfered with during transmission, as such will not be held responsible for any damage from e-mail transmission.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list _______________________________________________
Xansys mailing list -- xansys-temp@list.xansys.org To unsubscribe send an email to xansys-temp-leave@list.xansys.org If you are receiving too many emails from XANSYS please consider changing account settings to Digest mode which will send a single email per day.
Please send administrative requests such as deletion from XANSYS to xansys-mod@tynecomp.co.uk and not to the list
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.